First Look at Mars in 2020

October 6th, 2020, 11:50 p.m. local time

Consider this a trial run for Mars’s opposition next week.  I had not imaged everyone’s favorite red planet since its last opposition ~18 months ago.  Fortunately, everything still seemed in order, including the planet itself.  Telescope, camera, and all supporting equipment worked as intended.  I used my documented ISO and exposure settings from 2018.  Judging from the result, they worked well, and should be sufficient for Mars over the next week or so.

Mars is extraordinarily difficult to focus, at least from my Dobsonian.  For comparison, Jupiter is relatively easy, as all I need to do is crank up the ISO and exposure, then fine focus until I have sharp dots for the smallest of the Galilean moons.  Saturn doesn’t have this benefit, though its unique shape, with the gaps between the rings and planet, offer a serviceable guide.

There are no guideposts when focusing on the Martian disc, which is either near circular or oval.  Its two moons are far too small to be picked up by a backyard telescope.  So my focus on Mars is always going to be about as “best guess” as guesses go.  It’s also why I continually refocus and take at least three to four separate sets of videos.

Summary of my equipment, settings, and software used:

  • Telescope: Dobsonian reflector 254mm / 10″ (homemade)
  • Camera: Canon EOS Rebel SL3
  • Barlow: TeleVue Powermate x5 1.25″
  • Filter: Baader Neodymium 1.25″
  • Canon T ring and adapter
  • Relevant camera settings:
    • ISO 800
    • Exposure: 200
    • HD video at 60fps
    • Created from three videos of about 25s each, best 25-35% of frames
  • Software for post-processing:
    • PIPP
    • Autostakkert
    • Registax 6
    • PaintShop Pro for minor touch-ups

3 thoughts on “First Look at Mars in 2020

  1. I find focusing on Mars difficult too, with all its atmospheric distortions.

    I finally tried using my Bahtinov mask, which is designed for stars and not planetary discs.

    However I was surprised when I found that if I cranked the exposure and gain right up I got some blurry lines which when bright enough were easily adjusted to be symmetrical – and the output was in focus!

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s